SSD




Product Image Item Name- Price
4GB 40-Pin Vertical Flash Disk Module (SLC)

4GB 40-Pin Vertical Flash Disk Module (SLC)

General Interface 40PIN IDE Socket Performance Sustained Read 43MB/S Sustained Write 21MB/S 4KB Sequential Read IOPS 4311 4KB Sequential Write IOPS 647 Average Access time 0.3ms Storage Media NAND FLASH MLC(Test Flash:2pcs K9HCG08U1M) Power Consumption Input Voltage 3.3V Idle 0.0005 W Active 0.45W Reliability &Endurance Write endurance 8years@100gbytes write and erase per day at 32GB Read...
$41.64

Add:

4GB 44-Pin Vertical Flash Disk Module (SLC)

4GB 44-Pin Vertical Flash Disk Module (SLC)

General Interface 44PIN IDE Socket Performance Sustained Read 43MB/S Sustained Write 21MB/S 4KB Sequential Read IOPS 4311 4KB Sequential Write IOPS 647 Average Access time 0.3ms Storage Media NAND FLASH MLC(Test Flash:2pcs K9HCG08U1M) Power Consumption Input Voltage 3.3V Idle 0.0005 W Active 0.45W Reliability &Endurance Write endurance 8years@100gbytes write and erase per day at 32GB Read...
$41.64

Add:

4GB SLC 40-pin Low Profile Lockable Housing DOM 5V

4GB SLC 40-pin Low Profile Lockable Housing DOM 5V

Product Description The 4GB Value-Added Series Industrial Grade ATA Disk on Module (DOM) is a high performance flash disk module plugs directly into a standard 40-pin 2.54mm pitch IDE male connector on most motherboards, with a low profile lockable housing. The ADM III VA Series has a standard ATA/IDE bus interface (512 bytes per sector and ATA command set compatible) supports up to PIO Mode-4,...
$58.30

Add:

4GB SLC 44-pin Low Profile Housing DOM 5V

4GB SLC 44-pin Low Profile Housing DOM 5V

Product Description 4GB 44-pin SLC Type Industrial DOM, Low Profile Housing Kingspec's ATA-Disk Module (ADM) is a high-performance, embedded flash drive designed to replace the conventional IDE hard disk drive. The ADMs can be plugged into a standard IDE connector commonly found in desktops, IT-STB, industrial PCs and thin client systems. Kingspec's ADM SSD has a built-in microcontroller with...
$59.98

Add: